Gamah™ Pipe Clamps 352 Coupling System

17

jpeg

Enlarge this image

Design and Application
Gamah Pipe Clamp 352 Coupling System is a complete rigid tube coupling solution.
All components in the system comply with AS1650 and include Swage On Aluminium Flanges, duty selected Flange O’rings, Aluminium Sleeve and Clamp.

• Tube OD Size ½” to 1 1/4” (12.7mm to 31.75mm)
• Dash Sizes –8 –10 – 12 –16 –20
• Swage On Flanges provide a robust and reliable pipe to clamp interface, with none of the reliability problems associated with welded joints.
• Simple & repeatable, Flange swaging process can be carried out both manually and by machine.
• The Flange design ensures that maximum angular movement can be achieved without transferring the load to the clamp.
• The latch components of the Clamp are mounted on integral lugs.
• The Clamps double-hinged design eases fitting in tight spaces.
• 3 Pawl Latch locks automatically when the coupling is snapped shut.
• Secondary Latch protects the 3 Pawl Latches.
• For added security the clamp will not open unless all 3 Pawls are lifted simultaneously.

Material of Construction

• Clamshell Body ~ Aluminium with Nicotef coating
• Pins, Springs and Pawl Latches ~ Stainless Steel
• Sleeve ~ Aluminium
• Flange ~ Aluminium
• Flange O’rings ~ Viton for Oil & Fuel, EPDM for Water

Operating Parameters

• Pressure Rating ~ 6.3 Bar
• Temperature Range ~ -54°C to +190°C
• Angular Misalignment ~ 4 Degrees
• Axial Adjustment ~ 6.35mm
• Operating Media ~ Oil, Fuel, coolant, Water, Air

Clamp Fitting Operation
Installation, Place sleeve over O’ring Flanges, The Clamp can then be wrapped around the sleeve. Snap lock, and then push down secondary latch. The clamp can now be lock wired if required.

Removal, Remove lock wire if in place, Lift Secondary Latch, using thumb and fore finger squeeze the Pawl Latches together and the clamp will open. Slide the Sleeve from the pipe connection.
www.anmotorsportdesign.co.uk