-2 Pushlock Brake bleed Motorsport FRH85 Series

36

jpeg

Enlarge this image

Design and Application
Eaton Pushlock self-seal quick disconnect couplings are designed for high reliability and performance under adverse conditions.

Connections can be customised to suit customer interfaces
Coupling can also be integrally swaged to Titeflex Aerospace hose products for additional weight saving and elimination of leak paths.

Suitable for use with all fluids currently used in Aerospace and Motor sport systems.

• Minimal air inclusion on connection
• No spill on disconnection.
• Instantaneous action to lock and unlock.
• Minimum outside diameter compatible with maximum bore.
• Minimal pressure drops.
• Integral self-locking mechanism.
• Simple one handed operation
• End terminations to suit customer specifications

Materials of Construction

• Nipple ~ Titanium TA11
• Socket ~ Aluminium L168
• Cap ~ Titanium TA11
• Seals ~ Various to suit Media

Size and Weight

• Nipple & Pressure Cap ~ 7.8 grams
• Socket ~ 7.0 grams
• Nipple & Cap ~ 19.1mm Long & 11.0mm OD
• Socket ~ 26.1mm Long & 17.1 OD

Operating Parameters

• Pressure: Up to 100 Bar
• Temperature Range -20 °C to +300 °C
• Bore Size Range Dash 2
• No Spill
• Minimum Connections and Disconnection’s 200 cycles.
• Typical Operating Media: Hydraulic Fluids

Operation
To couple, Remove Cap, Insert Socket on to Nipple and push at rear end of Socket, the Socket will grip automatically and lock.
To uncouple, pull the locking ring away from Nipple. Replace Cap.